OL 360 EN * Opening and locking system for outward opening bottom-hung, top-hung and side-hung windows
- System solution with profile-mounted E 350 N spindle drive and a bracket set with locking device
- Mechanical locking at the main closing edge by the spindle drive
- Large opening width with small spindle stroke
- Only Solo operation possible
Opening and locking system for outward opening bottom-hung, top-hung and side-hung windows
Application Areas
- Natural ventilation (230 V) in the façade area
- Opening and locking of outward opening windows with bottom-hung, top-hung and side-hung leaves
- Installation on wooden, PVC or metal windows
- Leaf installation
Technical data
OL 360 EN | |
Space needed (min.) | Leaf frame: min. 33 mm, cover frame: min. 45 mm |
Permissible dimensions of primary closing edge Solo for timber and aluminium frames | 430 - 1200 mm |
Permissible dimensions of primary closing edge Solo for plastic frames | 430 - 800 mm |
Leaf heights for Solo and Syncro | 600 - 1600 mm |
Available stroke length | 150 mm, 200 mm, 300 mm |
Force of pressure (max.) | 750 N |
Compressive force | 750 N |
Tensile force | 750 N |
Panel weight (max.) | 30 kg/m² |
Voltage at operation | 230 V ± 10 % |
Operating voltage | 230 V |
Current consumption | 0.15 A |
Power consumption | 35 W |
Min. core cross section | 1.5 mm² |
Number of cores | 3 cores |
Service temperature | -20 - 70 °C |
IP rating | IP65 |
protection rating | II |
Locking and additional angle bracket | Yes |
End position cut-off extended | Electromechanical |
End position cut-off retracted | Electromechanical |
Overload cut-off | Yes |
Bottom-hung window OUTWARD-opening leaf installation | Yes |
Side-hung window OUTWARD-opening door leaf installation | Yes |
Top-hung window OUTWARD-opening leaf installation | Yes |
Downloads
* Notice about the products displayed
The products mentioned above may vary in form, type, characteristics and function (design, dimensions, availability, approvals, standards etc.) depending on the country. For questions please contact your GEZE contact person or send us an E-Mail .